Parker Compax3 Installation Manual

Parker EME
Notes on the Documents Supplied
192-121100 N6 June 2008 5
Your PC is connected with Compax3 via a RS232 cable (SSK1).
Cable SSK1 (COM 1/2-interface on the PC to X10 on the Compax3 or via adapter
SSK32/20 on programming interface of Compax3H).
Start the Compax3 servo manager and make the setting for the selected interface
in the menu"Options Communication settings RS232/RS485...".
In the menu tree under device selection you can read the device type of the
connected device (Online Device Identification) or select a device type (Device
Selection Wizard).
Then you can double click on "Configuration" to start the configuration wizard. The
wizard will lead you through all input windows of the configuration.
Connection between
PC - Compax3
Device Selection
Configuration

Parker Compax3 Specifications

General

Protection Class	IP20
Control Modes	Torque, Speed, Position
Feedback Options	Incremental encoder, Absolute encoder, Resolver
Communication Interfaces	CANopen, EtherCAT, Profinet
Safety Features	STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop)
Input Voltage	200-480 VAC
Relative Humidity	5% to 85% (non-condensing)
Shock Resistance	According to EN 60068-2-27
Operating Temperature	0°C to +40°C