Parker Compax3 Installation Manual

Parker EME
Introduction
192-121100 N6 June 2008 7
In this chapter you can read about:
Device assignment Compax3 Fluid......................................................................................7
Type specification plate Compa
x3 Fluid...............................................................................8
Packaging, transport, storage ..............................................................................................9
Safety Instructions..............................................................................................................10
Warranty conditions............................................................................................................11
Conditions of utilization for CE-co
nform operation .............................................................12
2.1 Device assignment Compax3 Fluid
This manual applies to the following devices:
 C3F001D2 F12 I12 T11
 C3F001D2 F12 I20 T11
 C3F001D2 F12 I11 T30
 C3F001D2 F12 I20 T30
 C3F001D2 F12 I21 T30
 C3F001D2 F12 I11 T40
 C3F001D2 F12 I20 T40
 C3F001D2 F12 I21 T40
2. Introduction

Parker Compax3 Specifications

General

Protection Class	IP20
Control Modes	Torque, Speed, Position
Feedback Options	Incremental encoder, Absolute encoder, Resolver
Communication Interfaces	CANopen, EtherCAT, Profinet
Safety Features	STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop)
Input Voltage	200-480 VAC
Relative Humidity	5% to 85% (non-condensing)
Shock Resistance	According to EN 60068-2-27
Operating Temperature	0°C to +40°C