Parker SLVD7N - 11.2. Programming with MotionWiz

Parker Hannifin S.p.A S.B.C. Division SLVDN User’s Manual
Page 126 of 181
11.2. Programming with MotionWiz
The serial kit:
USBTODRIVE is supplied to enable communication between a PC and the
drive. The kit (*) includes an USB/RS-422 converter, and serial connection cable. The
enclosed communication software (supplied free of charge) designated
MotionWiz has the
following HW/SW requirements: PII microprocessor or higher,
Windows2000 or WindowsXP,
mouse and serial port for drive connections. The main features of MotionWiz are:
- serial connection of up to 32 drives
- reading and setting of basic parameters and drive commands
- reading and setting of commands and parameters of operating modes
- functional block diagrams
- pico-PLC program displayed as ladder diagrams
- display of pico-PLC program status during operation
- I/O status
- file storage of parameterisation including pico-PLC program
- uploading of parameterisation including pico-PLC program from a file that can be selected
from among those previously stored
- oscilloscope function
1
4
2
3
9
12
1
7
2
11
adaptation cable
Serial link X1 - SLVD-N
DB9 DB15 HD
(*)
Note: the adaptation cable (DB9 – DB15HD) isn’t included in the serial kit; the order
code is:
SERIALTOSLVDN.