Parker Hannifin S.p.A S.B.C. Division SLVDN User’s Manual
Page 42 of 181
5.13. External +24V power supply for the control
stage
The drive electronics, must be supplied with an external 24Vdc power supply, 1A minimum
per drive (pins: 1 and 2 of terminal block X4).
The 24Vdc power supply must be exclusively dedicated to the drive. Sharing the power
supply with other devices (e.g. brakes, electro-valves, etc.) could cause malfunctions.
5.14. Second/third axes connection
Order code: SSC-SLVDN Cable lenght: 18 cm
To Next Page
Loading...
