Parker Hannifin S.p.A S.B.C. Division SLVDN User’s Manual
Page 8 of 181
1.INTRODUCTION
1.1. General information
This manual describes the installation and commissioning of the frequency converter SLVD-
N (Small Low Voltage Drive-New) for brushless motors.
Read carefully
all the sections and the history of the revision of the manual on the final page
before using it.
1.2. Product description
The SLVD-N is a digital frequency converter for brushless motors. The operator interface
based on parameters makes it easy to configure the converter. Configurations of different
kinds make suitable it for many applications.
The drive, by the EtherNet interface optional card, can support the EtherCAT protocol to
management the state machine, in according to the standard CANopen DSP402, using the
COE messages (CANopen over CAT). Through the management of the real-time synchronous
of the cyclic messages (PDO), the master of EtherCAT can control the trajectories and the
multi-axes interpolations.
The SLVD-N is equipped with a RS-422/RS-485 serial interface which is used to configure,
monitor, and send commands to up to 32 SLVD-Ns at the same time.
To Next Page
Loading...
