Parker SLVD7N - Identification

Parker Hannifin S.p.A S.B.C. Division SLVDN User’s Manual
Page 9 of 181
1.3. Identification
The converters of the SLVD -N series are available in 6 models: SLVD1N, SLVD2N,
SLVD5N, SLVD7N, SLVD10N and SLVD15N. The number that follows the SLVD-N
abbreviation corresponds to the rated current of the converter in amperes.
Use the following table to specify the order code:
Where :
SLVD Servodrive series
1 Drive size (nominal current, up to 1 digit: 1, 2, 5, 7, 10, 15, 17)
N New series
D CAN Open protocol (DS402)
Resolver
E EnDat/incremental/sinc encoder input (from motor feedback)
H Incremental encoder+hall sensors input (from motor feedback)
F SinCos (one sin wave per pole pitch)
Y1 Optional board:
E5 : scheda EtherCAT
E5 EtherCAT release software
A label is attached on the right side of the converter that contains all the essential information
to correctly identify the unit:
 Serial number
 Model
 Nominal plate data
It is important to refer to this label before requesting any kind of technical information from
Parker Hannifin S.p.A S.B.C. Division
SLVD 1 N D Y1 E5
2 E
5 H
7 F
10
15
17