Introduction
This Manual is a repair instruction for F50/60 and is provided by Parsun to the dealers when
maintaining or repairing Parsun outboard motors. Please read this Manual carefully before
maintaining and servicing the outboard motor. Please use the repair procedures and tools
recommended in this
Manual when repairing and maintaining the outboard motor. If other maintenance procedures and
tools are selected, please follow the instructions of experienced maintenance personnel to avoid
injury to personnel and outboard motor.
The information, drawings and technical parameters used in this Manual are subject to the prototype
at the time of publication, so there can be slight differences between the actual motor you purchased
and that described in the Manual. If necessary, the Company will distribute the revised part to the
dealers.
When the following characters appear in the Manual, please read the Manual carefully and follow
the relevant instructions and descriptions correctly and carefully.
Warning:
Failure to obey the warning may cause injuries to maintenance personnel and bystanders, and in
serious cases, this may lead to death.
Attention:
Preventive measures must be taken to prevent outboard motor from being damaged.
Note:
Provide you with key information to make your operation steps simpler and clearer.
The last part of this Manual provides the common faults and troubleshooting methods of outboard
motors, so please read them carefully, and it can help you quickly judge the status of the outboard
motor and improve your working efficiency when overhauling the motor.
It is forbidden to copy and distribute this Manual without written authorization.
Suzhou Parsun Power Machine Co., Ltd.
After-sales service: 400-882-6659
0512-66212797
To Next Page
Loading...
Need help?
General
