Pegasus TFV2000D-E - Handling of Electric Equipment and Power Codes

- 13 -
3 Precaution for safety
1
5
2
6
3
7
9
4
8
10
CAUTION
Cool down or heat up the cargos to the designated
temperature in advance with other refrigerating device.
• If the cargos are not kept in the designated temperature, it may
deteriorate quality of the cargos due to inside container temperature
rise.
Waterproof the cargos if they need to be.
• Otherwise, it may deteriorate quality of the cargos due to the
spattering water from defrosting.
Handling of electric equipment and power codes
WARNING
• Do not directly splash water on the electric
equipment or wash them with water.
• Never touch the electric equipment
such as power plug and so on or
operate the switches with wet hands.
• Do not modify the power code or apply force
on it, by bending it by force, pulling it strongly
or twisting it, or do not put cargos on it.
• Otherwise, it may cause troubles of electric circuit, damages of power
codes or an electric shock.
• Use 4-core cabtyre cables (conductor
cross section with 8mm
2
or more)
for power cable. Do not connect it to
extension code.
( Refer to page 38.)
• Use MENNEKES Part no.6 (400V 32A)
for power supply plug.
• Otherwise, it may cause an electric shock or a re due to
the heat and breaking of wire.