Pegasus TFV2000D-E - Sleep Operation Setting

- 30 -
4 Initial setting
1
5
2
6
3
7
9
4
8
10
Sleep operation setting
1
2 4
3 5
1
Press the [MODE] switch.
The display changes to the "Current error display mode".
2
Press the [UP] or [DOWN] switch until
the display changes to the "Sleep
operation setting mode". (Right gure)
3
Press the [SET] switch.
" " or " " starts to blink in the
right side of the digital display area.
Icon
starts to blink.
4
Press the [UP] or [Down] switch to
select "
".
NOTE
●
" " or " " is displayed alternately
by pressing the [UP] and [DOWN] switch.
●
Select "
" when the "Sleep
operation" is not necessary or cancelled.
5
Press the [SET] switch.
The setting is completed and the display changes to the "Normal display
screen" (
Refer to page 22.)