- 21 -
3 Precaution for safety
1
5
2
6
3
7
9
4
8
10
Prevention of start during inspection work
While several people are working together for inspection and so on at the same
time, it is required to prevent other workers from getting injured by miss-start of
operation.
Lock the control panel. The worker must keep the key so that other workers can
not operate the refrigeration unit. Prepare a tag which states "WORKING" and
hang it on the control panel.
Clothing and protective equipment
Wear proper clothing and protective equipment to prevent from getting injured.
●
Wear the clothing such as long sleeves, long pants, gloves and eye
protections.
●
Do not wear accessories such as necklaces or a necktie to prevent it from
getting rolled in. Fasten the cuffs rmly.
Handling of grease and oil
As for the measure how to handle or dispose the fuel, sub-engine oil and
antifreeze coolant and so on to be used for this refrigeration unit, follow the
precautions stated on each product.
These are harmful to human body or environment when mishandling them.
When abnormal conditions are detected
Refer to "9. For emergency" when abnormal conditions are detected. Please
contact your nearest dealer when it is too difcult to handle.
For emergency
Contact the public agencies such as the police or the re department
immediately when an accident could result in serious injury, death, serious
property damage or environmental damage occurred. Contact your nearest
dealer to prevent second accident.
To Next Page
Loading...