- 42 -
5 Operation
1
5
2
6
3
7
9
4
8
10
NOTE
●
While the cover 1 is opened, the refrigeration unit will not start to operate
because the safety device will be activated.
(Error code "
" is displayed in the digital display area.)
Close the cover 1, then the unit starts to operate automatically.
(
Refer to page 61.)
●
When the refrigeration unit is connected to the commercial power supply, the
sub-engine can not drive even if the "drive selector switch" is set to "ENGINE".
Since "
" starts to blink in the digital display area, turn off the
commercial power supply.
●
When the refrigeration unit is not connected to the commercial power supply,
the motor cannot drive even if the "drive selector switch" is set to "STANDBY
MOTOR".
Since "
" starts to blink in the digital display area, turn on the
commercial power supply.
●
When the automatic start/stop is selected and the inside container temperature
is close to the setting temperature, the refrigeration unit sometimes does not
start.
To Next Page
Loading...