pellenc EXCELION 2 DH - Page 53

BRUSH CUTTER EXCELION 2 DH
53_153238-A
Resetting working time
1. Press and hold the MENU / POWER button (9) for 1
second to reset the value.
2. Pressing the selector or the trigger exits the menu.
Note
Resetting the working time also resets the average
power and the consumed energy.
-
5.5.3.2. DISPLAY OF THE AVERAGE POWER USAGE
1. Access the "Information" menu (refer to Sec-
tion 5.5.3, « "Information" menu and access to ma-
chine settings ».
2. Double click on the POWER / MENU button (9) so
as to display the menu "2 - AVERAGE POWER-W".
The display shows a value in watts (W).
Note
If the average consumption is below 500W and the
tool is fitted with blades / mulching blade or CITY
CUT, the screen displays the "Energy saving" pic-
togram (refer to Section 5.3.2, « “Energy saving”
pictogram »).
Note
If the data is insufficient to calculate an average
consumption, the display will show "- - -".
53