pellenc EXCELION 2 DH - Page 54

BRUSH CUTTER EXCELION 2 DH
53_153238-A
Reset average power
1. Hold down the POWER / MENU button (9) for 1 se-
cond to reset the value to 0.
2. Pressing the selector or the trigger exits the menu.
Note
Resetting the average power also resets the consu-
med energy and working time.
-
5.5.3.3. ENERGY CONSUMPTION DISPLAY
1. Access the "Information" menu (refer to Sec-
tion 5.5.3, « "Information" menu and access to ma-
chine settings ».
2. Click several times on the POWER / MENU button
(9) to access the "3--ENERGY - KWH" menu.
The display shows a value in kilowatt-hours (KWH).
Note
If the data is insufficient to calculate an average
consumption, the display will show "- - -".
54