Driver Software Functions
49
4.12. Right Button
Right Button function simulates the right button function of a mouse. Click the right
button and the user can only touch the screen once and the driver changes the touch
definition to the left button.
4.13. Hide Cursor
Hide Cursor function keeps the cursor arrow and other cursor symbols from appearing
when using the touchscreen. The cursor appears when user turns this function off.
4.14. Cursor Offset
Cursor Offset function lets the user adjust the position of the touch point to a desired
location away from the real touch point.
4.15. Double Click Area and Speed
Double Click Area and Speed function lets the user adjust the double click area and
speed to their personal preference.
4.16. About
This option shows the exact version of the drivers and controller firmware. Updated
drivers are available for downloading on the PenMount website at
http://www.penmount.com/
.
4.17. Edge Compensation
In PenMount Control Panel, when any of the detected PenMount device is selected and
the Configure button is pressed, you will be able to see the Edge Compensation tag,
which is for Advanced Calibration. You can adjust the settings from 0 to 30 for
accommodating the difference of each touch panel. (Note: Edge Compensation is only
supported by PenMount Windows Universal Driver (for Windows 2000/XP/2003/VISTA).)
To Next Page
Loading...
