Installing Drivers for 6000 Boards
The output format is as follows:
<counter> : counter of raw data
* : current dot
<raw data> : the raw data of touch
<coordinate>: the X, Y of A/D
<offset> : the offset between last dot
Function Key:
[ESC] - exit
7. Help
See 'README.TXT' file
8. Test
Before test, make sure the driver is loaded.
<1> The test program is named 'MOUSETST.EXE'. You can run it with
parameter:
MOUSETST 18
The parameter is video mode number:
mode 18 (12h) : 640x480x16color
mode 19 (13h) : 320x240x256color
....
or run:
MOUSETST
to see what the parameters are
<2> run pmtest.exe
<3> edit
You can also run 'EDIT', the editor bundle in MS-DOS.
3.2. Install PenMount Windows Universal Driver (for
2000/XP/2003/VISTA/7)
Before installing PenMount Windows Universal Driver (for 2000/XP/2003/VISTA/7),
you must have either Windows 2000, XP 32/64bit, 2003, Vista 32/64bit, or Windows 7
32/64bit installed and running on your computer. You must also have one PenMount
either 6200x, 6202B, 6300, or 6500 control boards installed.
3.2.1. Install PenMount Driver in Windows XP
If you have an older PenMount driver for Windows 2000, XP 32/64bit, 2003, or
Vista 32/64bit driver installed on your system, uninstall it first and follow the
To Next Page
Loading...
