Pentair Biffi ICON 2000 - Set-Up Menu Structure; Actuator Set-Up Menu; Nameplate Data Menu; Valve Data Menu

25
BIFFI ICON 2000
InstructIon and operatIng manual
XXXXXX OFF STOP NEXT?
DISPLAY
LOCAL REMOTE
Routines: - Tag name change? - Serial number change? - Manufacturer change? - Break OP torque change? - Break CL torque change? - Max stem thrust change? - Flange type change?
Routines: - stroke limits change? - torque set-up change? - ESD set-up change? - Remote controls change? - Local controls change? - Output relays change? - Positioner * change? - Fail safe * change? - Out 4-20 mA * change? - Interlock change? - 2-speed timer change? - Bus * change? - Miscellaneous change?
To exit from SETUP menu press
YES and NO simultaneously or
move the 3-position selector to
LOCAL or REMOTE
1. Routines with * are only available if the relevant
modules are present
2. Nameplate menu not available in Set-up mode
ENTER
PASSWORD
TO VIEW
MENU
PressYESorNOtoanswertheappropriateprompts(change?OK?,etc.)
SELECT
LANGUAGE
Routines: - Set password change? -Clearalarmlog OK? -Settorqueprofilereference OK? -Settorquecurvereference OK? -Clearrecentdatalog OK? - Maintenance date change? - Data logger change?
YES
YESYES
YES
NO
NO
NO
NO
YES
STOP
NO
NO
NO
NO
YES
OFF
3-POSITION SELECTOR
VALVE DATA
CHANGE?
ACTUATOR SETUP
CHANGE?
SETUP MODE
OK?
MAINTENANCE
CHANGE?
EXIT?
7. SET-UP MENU