Pentair Biffi ICON 2000 - Lithium Battery Change

48
BIFFI ICON 2000
InstructIon and operatIng manual
•Disconnecttwowires(+)(-)fromthemain
board.
•Bringthecovertoasafearea.Wheninasafe
area:
- Remove the label.
WARNING
If the actuator is located in a hazardous area a
“hot work” permit must be obtained unless the
actuator can be moved to a non-hazardous area.
11.3 LITHIUM BATTERY CHANGE
•Isolatethemainsupplytotheactuatorandall
other control voltages.
•Opentheterminalboardscover.
- Remove the battery cover.
- Replace the battery.
IMPORTANT
The new battery must be the same type as the one
provided: Lithium – SAFT LS 9V.