Pentair Biffi ICON 2000 - View Menu Structure; Actuator Setup View; Name Plate View; Valve Data View

27
BIFFI ICON 2000
InstructIon and operatIng manual
8. VIEW MENU
To exit from VIEW menu press
YES and NO simultaneously
or move the 3-position selector to
LOCAL or REMOTE
Routines with * are only available if the
relevant modules are present.
TO SETUP
MENU
PressYESorNOtoanswertheappropriateprompts(OK?,view?,next?,etc.)
SELECT
LANGUAGE
DISPLAY
LOCAL REMOTE
YES
YES NO
NO NO
YES
YES
YESYESYES
NO
NO NO
NO NO
YES
NO
STOP
OFF
3-POSITION SELECTOR
XXXXXX OFF STOP NEXT?
VIEW MODE
OK?
ACTUATOR SETUP
VIEW?
NAME PLATE
VIEW?
VALVE DATA
VIEW?
MAINTENANCE
VIEW?
EXIT?
Routines: - Stroke limits view? - Torque set-up view? - ESD set-up view? - Remote controls view? - Local controls view? - Output relays view? - Positioner * view? - Fail Safe * view? - Out 4-20mA * view? - Interlock view? - 2-speed timer view? - Bus * view? - Miscellaneous view?
Routines: - Serial number view? - Actuator type view? - Torque / Thrust view? - Actuator speed view? - Power supply view? - Motor data view? - Test date view? - Wiring diagram view? - Enclosure view? - Certificate view? - Lubricant view? - Revision view? - Torque sensor view?
Routines: - Tag name view? - Serial number view? - Manufacturer view? - Break OP torque view? - Break CL torque view? - Max stem thrust view? - Flange type view?
Routines: - Alarm log view? - Torque profile view? - Torque curve view? - Operation log view? - Maintenance date view? - Data logger view?