Pentair Pentek Series - Page 40

39
SECTION 7: Hitachi
®
6” and Larger Submersible Motors
7.5 Motor Dimensions
Length
3.000 (76.2)
2.997 (76.12)
1.811 (45.99)
Spline Data
15 Teeth
16/32 Pitch
ANSI B92.1 Compliant
Min. 0.95 (24.13) Full Spline
2.875 (73.03)
2.860 (72.64)
0.987 (25.987)
0.982 (24.943)
5.51
(139.95)
(4) 1/2 - 20
UNF-2B Threaded
Studs on 4.375 (111.1) Dia.
Bolt Circle
1.000 (25.4)
0.999 (25.375)
All dimensions
in inches (mm)
Shaft free end-play
0.016-0.154 (4.06 - 3.91)
Hitachi 6” and
Larger Motors
Hitachi
®
is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.