149
Shooting Functions
4
3
Press the four-way controller (3)
and use the four-way controller
(45) to select l, b, or c.
4
Turn the front e-dial (R) to set the number of shots.
5
Turn the rear e-dial (S) to set the EV compensation
value.
The following EV compensation values can be set according to the step
interval set in [1. EV Steps] (p.116) in the [A Custom Setting 1] menu.
6
Press the 4 button.
The camera is ready to take a picture.
7
Press the shutter release button halfway.
The focus indicator ] appears in the viewfinder and EV compensation
value appears on the status screen and LCD panel and in the viewfinder
when the subject is in focus.
l Shooting with the shutter release button.
b
Shooting with the self-timer. Self-timer operates according to the
self-timer (p.136) setting.
c
Shooting with the remote control. Remote control operates
according to the remote control (p.138) setting. When set to i
(Remote Continuous Shooting), the shutter is released immediately.
Step interval Bracket value
1/3 EV ±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0
1/2 EV ±0.5, ±1.0, ±1.5, ±2.0
Drive Mode
Exposure Bracketing
Cancel
3image(s)
MENU
11223344+5
-
5
±0.5EV
MUP
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
