EasyManuals Logo

Pentax K-7 User Manual

Pentax K-7
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
150
Shooting Functions
4
8
Press the shutter release button fully.
Continue to press the shutter release button until the set number of shots
has been captured.
Three or five consecutive images will be taken according to the order set
in [8. Auto Bracketing Order] in the [A Custom Setting 2] menu (p.85).
When the focus mode is set to l (Single mode), the focus is locked in the
first frame position and used for subsequent continuous frames.
Even if you take your finger off the shutter release button during Auto
Bracket, the Auto Bracket exposure setting will remain effective for twice as
much time as the exposure metering timer (default setting is approximately
20 seconds) (p.114) and you can take a picture at the next compensation
value. In this case, auto focusing works for each frame. After about twice as
much time as the exposure metering timer, the camera returns to settings for
taking the first picture.
You can combine Auto Bracket with the built-in flash or external flash (P-TTL
auto only) to change only the flash output continuously. However, when using
an external flash, holding the shutter release button down to take three
continuous frames may cause the second and third frames to be taken before
the flash is fully charged. Always take one frame at a time after confirming
that charging is complete.
Exposure Bracketing is not available when the exposure mode is set to
p
(Bulb) mode.
Exposure Bracketing and Multi-exposure cannot be used at the same time.
The mode set last is used.
When [7. One-Push Bracketing] in the [A Custom Setting 1] menu (p.85) is
set to [On], even if the shutter release button is not continuously pressed
fully, all frames are automatically shot with one press of the shutter release
button.
Taking Only Overexposed or Underexposed Pictures
You can use Auto Bracket mode for only underexposure or
overexposure shots by combining the operation with EV
compensation (p.115). Auto Bracket is performed in both cases on
the basis of the specified EV compensation value. (Up to ±8 EV)

Table of Contents

Other manuals for Pentax K-7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax K-7 and is the answer not in the manual?

Pentax K-7 Specifications

General IconGeneral
Megapixel15 MP
Camera typeSLR Camera Body
Sensor typeCMOS
Digital zoom0 x
InterfaceUSB
Digital SLRYes
Minimum processorP4
Camera shutter speed1/8000 - 30 s
Minimum storage drive space1024 MB
Compatible operating systemsWin Vista/XP Mac X10.3-10.5
FocusTTL
Auto focusing (AF) modescentre weighted auto focus, continuous auto focus, selective auto focus
Light meteringCentre-weighted, Spot
ISO sensitivity100, 3200, Auto
Light exposure modesaperture priority AE, manual, shutter priority AE
Display diagonal3 \
Display resolution (numeric)921000 pixels
Magnification0.92 x
USB version2.0
Product colorBlack
Scene modesself-portrait, Landscape (scenery)
Image editingcrop, resizing, rotating
Photo effectsVivid
White balanceauto, Cloudy, daylight, Fluorescent, Incandescent, manual, Shade, Tungsten
Camera playbacksingle image, slide show, thumbnails
Battery typeD-LI90
Battery life (max)7.3 h
Battery life (CIPA standard)1000 shots
HD typeNot supported
Motion JPEG frame rate30 fps
Maximum video resolution1280 x 720 pixels
Compatible memory cardssd, sdhc
Storage temperature (T-T)4672 x 3104 °C
Weight and Dimensions IconWeight and Dimensions
Depth72.5 mm
Width130.5 mm
Height96.5 mm
Weight670 g

Related product manuals