97
Shooting Functions
4
2
Confirm the shutter speed and aperture.
Confirm using the status screen, viewfinder or LCD panel.
• Set the Program Line to use in [Program Line] in the [A Rec. Mode 2] menu
(p.94).
• Set the EV compensation in increments of 1/3 EV or 1/2 EV. Set the exposure
steps in [1. EV Steps] in the [A Custom Setting 1] menu. (p.116)
• The proper exposure may not be obtained with the selected shutter speed
and aperture when the sensitivity is set to other than [AUTO] (p.90).
AF.S
1/
ISO
AUTO
125
100
5.6
F
11223344+5
-
5
AWB
JPEG
14M
[
37
]
P
e-dial in Program
You can set the action for the front and rear e-dials in e mode with
[22. e-dial in Program] in the [A Custom Setting 4] menu (p.86), and
you can change the shutter speed and aperture while maintaining the
proper exposure.
• You can only set the shutter speed or aperture to a value that will
give a correct exposure with the relative aperture or shutter speed
range of the lens being used. If the brightness changes and the
shutter speed or aperture is outside the relative range, the shutter
speed or aperture will blink on the status screen and LCD panel
and in the viewfinder.
• Pressing the | (Green) button returns to Automatic Exposure.
Settings Front e-dial (R) Rear e-dial (S)
1 b (Shutter Speed) c (Aperture)
2 c (Aperture) b (Shutter Speed)
3 EV Compensation P.SHIFT (Program Shift)
4 P.SHIFT (Program Shift) EV Compensation
5 – (Not Available) – (Not Available)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
