Pentax Optio 230 - Disconnecting the Camera from Your

95
Playback/Erasing
Disconnecting the camera from your PC
Disconnecting the camera from your PC (Windows 2000)
z Double click (Hot Plug icon)
on the lower right task bar tray of
the desktop.
The [Remove Hardware] screen will
appear.
x Make sure [PENTAX USB Disk
Device] is selected and click
[Stop].
[Stop Hardware Device] screen will
appear.
c Make sure [PENTAX USB Disk
Device] is selected and click [OK].
A message will appear.
v Click [OK].
b Disconnect the USB cable from
your PC and camera.
For Windows 98/Me, there is no Hot Plug icon. When removing the
camera, turn off the camera and disconnect the USB cable.
memo