23
1
Getting Started
* 6 and 7 are only displayed when the shutter release button is pressed half-way.
* For 8, M appears if the shutter release button is pressed halfway when
[Shake Reduction] in the [A Rec. Mode] menu is set to [Sensor Shift] or [Dual].
l appears when [Shake Reduction] is set to [Off].
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.85).
* 14 changes depending on [Eye-Fi] setting in the [W Setting] menu.
* 15 changes depending on [Pressure Sensor] settings in [W Setting] menu.
* 17 changes depending on [GPS] settings in [WSetting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 18 appears when recording the GPS log.
* 20 disappears for two seconds after the camera is turned on.
* 22 changes depending on [D-Range Setting] settings in the [A Rec. Mode]
menu.
No icon is displayed on the screen when [Highlight Correction] and [Shadow
Correction] are both set to [Off].
* When the shooting mode is b (Auto Picture) and if you press the shutter
release button halfway, the automatically selected shooting mode appears in
A1 even when “No Info” is selected.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
* Some indications may not appear depending on the shooting mode.
To Next Page
Loading...
