USER MANUAL
Peplink Balance Series
15.4.3 CNAME Records
To create a new CNAME record, click the New CNAME Record button.
CNAME records are typically used for defining classless reverse lookup zones. Subnetted reverse lookup
zones are further described in
RFC 2317, "Classless IN-ADDR.ARPA delegation."
15.4.4 PTR Records
To create a new PTR record, click the New PTR Record button.
Host IP Number field is the last integer in the IP address of a PTR record. E.g. for the IP
address 11.22.33.44, where the Reverse Lookup Zone is 33.22.11.in-arpa.addr, the Host IP Number
should be 44.
Points To field defines the host name which the PTR record should be pointed to. It must be an FQDN.
http://www.peplink.com -111 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
