peplink 20 User Manual

USER MANUAL
Peplink Balance Series
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
SSL Encryption
Check the box to enable SMTPS. When the box is checked, the next field SMTP Port
will be changed to 465 automatically.
Two different emails templates can be set and customize.
• Account Information Email will be sent when the user login at the first time with a guest account.
• Password Reset Email will be sent when the user is requesting a password reset on the portal
page.
Different dynamic information is available for the email template.
Dynamic Information for Captive Portal Email Template
${NAME}
This is to specify the name of account user.
${SENDER}
This is to specify the sender’s name.
${RESET_KEY}
This is to specify the reset password of the specified account.
${USERNAME}
This is to specify the account user name.
${PASSWORD}
This is to specify the password of the account.
${EXP_DATE}
This is to specify the expiry date of the account.
Once the settings are complete, press the Save button to save and activate settings.
http://www.peplink.com -134 / 207 - Copyright © 2013 Peplink

peplink 20 Specifications

General

Load Balancing	Yes
VPN Support	Yes
Power over Ethernet (PoE)	No
LAN Ports	4
LAN Interface	4x GE
Wi-Fi Standard	802.11ac
PepVPN/SpeedFusion Throughput (AES 256	200 Mbps
Power Input	12V DC