USER MANUAL
Peplink Balance Series
DNS Server
This setting specifies the WAN IP addresses on which the DNS server of Peplink Balance
should listen.
If no addressesare selected, the Inbound Link Load Balancing feature will be
disabled;Peplink Balance will not respond to DNS requests.
To specify and/or modify the IP addresses on which the DNS Server should listen, click the
Edit button that corresponds to DNS Server Listens on, and the following screen is
displayed:
To specify the Internet IP addresses on which the DNS Server should listen, select the
WAN connection by checking the appropriate boxes and the IP addresses associated with
the WAN connections by highlighting the appropriate items in the list. (Multiple items in the
list can be selected by holding CTRL and clicking on the items.)
Click Save to save the settings when configuration is complete.
Zone Transfer
This setting specifies the IP address(es) of secondary DNS server(s)that are to be allowed
to retrieve zone records from the DNS server of Peplink Balance.
The zone transfer server of Peplink Balance listens on TCP Port 53.
http://www.peplink.com -98 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
