Pepperl+Fuchs UC-18GS Series User Manual

2020-11
12
UC***-18GS series
Product Description
LED display for sensors with analog output
Green LED Yellow LED Red LED
In normal operation
Error-free operation On Output state Off
Fault (e.g., compressed air) Off Retains previous state (factory
default setting, can be
changed via IO-Link)
On
Standby (high level for > 1 s at
synchronization input)
Flashing Retains previous state Off
When programming the limits
Object detected Off Flashing slowly Off
No object detected Off Flashing quickly Off
Unreliable object detection Off Off Flashing
Confirmation of successful pro-
gramming
Flashes 3x Off Off
Warning in the event of invalid
programming
Off Off Flashes 3x
When programming operating modes
Programming the output mode Flashing Off Off
Programming the output type Off Flashing Off
Programming the sound beam
width
Off Off Flashing
Table 2.2

Pepperl+Fuchs UC-18GS Series Specifications

General

Brand	Pepperl+Fuchs
Model	UC-18GS Series
Category	Accessories
Language	English