Pepperl+Fuchs UC-18GS Series User Manual

2020-11
44
UC***-18GS series
Configuration and Analysis with DTM via IO-Link
7.7 Service Menu Option
Figure 7.17
You can use the Service menu option to set the following service functions.
• Reset to factory defaults: activating the switch resets the sensor to settings as deliv-
ered. All previous parameter changes are lost as a result of this.
• Locator indication: setting the "localization display" to "enabled" makes the LEDs flash
simultaneously. This function can be used to locate a sensor in a plant or machine more
easily. This function is disabled by default, which means that the LEDs indicate status and
diagnostic information.
7.8 Information Menu Option
Figure 7.18
The Information menu option consists of 3 tabs
• Sensor details: information about hardware and software version
• IO-Link details: information about the device ID, vendor ID and information about the IO-
Link communication parameters
• DTM details: Information about the DTM version

Pepperl+Fuchs UC-18GS Series Specifications

General

Brand	Pepperl+Fuchs
Model	UC-18GS Series
Category	Accessories
Language	English