UC***-18GS series
Configuration and Analysis with DTM via IO-Link
2020-11
43
• Value outside the set limits
Data is recorded if specified, absolute limit values are exceeded. The distance value in
mm and the value at the sensor analog output (if physically present on the sensor) are
available as reference values. In addition, the "Trigger" parameter can be used to deter-
mine whether data recording should take place once per limit being exceeded or for the
full duration.
1.
Use the "Name of log file" field to set the file path and file name for logging data. To do so, click
on the "..." button.
2.
Use the "Data logging mode" option to set the events which should trigger automatic recording
of data. You need to press the "OK" button at the end to save the setting.
To Next Page
Loading...
Need help?
General
