Pepperl+Fuchs UC-18GS Series User Manual

UC***-18GS series
Product Description
2020-11
13
2.3 Accessories
Various accessories are available.
2.3.1 Accessories for Mounting and Connection
Several components are available for mounting and connecting UC***-18GS series sensors.
You will find details online at www.pepperl-fuchs.com on the product page for the relevant
sensor or on the relevant datasheet.
The following types of accessories are available for order:
• Mounting aid AB-18
• Connection cable and cordset
2.3.2 Parameterization Aids
The following parameterization aids are available:
Note
For mounting, connection, and commissioning, the following product information is available
online at www.pepperl-fuchs.com on the product page for the relevant sensor: datasheet,
commissioning instructions, manual. The relevant DTM also contains comprehensive context-
related help texts.
Designation Description
PACTware FDT frame application for operating IODDs and DTMs
Pepperl + Fuchs PACTware
Connection Wizard
Wizard for simple project and connection set-up of the ultrasonic
sensor in PACTware.
Visit www.pepperl-fuchs.com and access the product page for
the relevant UC***-18GS series sensor.
IODD for UC***-18GS* IODD (IO Device Description) – device description for operating
the sensor, integration in the system environment
Visit www.pepperl-fuchs.com and access the product page for
the relevant UC***-18GS series sensor
DTM for UC***-18GS* DTM (Device Type Manager) – device description and graphic
user interface for operating the sensor, integration into the system
environment
Visit www.pepperl-fuchs.com and access the product page for
the relevant UC***-18GS series sensor
IO-Link Offline Parameter-
ization Tool
FDT frame application for operating IODDs and DTMs. This tool
contains PACTware, IODD Interpreter DTM, and IO-Link USB
Master DTM.
Visit www.pepperl-fuchs.com and access the product page for
the relevant UC***-18GS series sensor.
IO-Link-Master02-USB
IO-Link USB adapter box to communicate with the IO-Link device
via a PC, M12 connection for sensor
UC-PROG-IR-USB Interface cable to parameterize sensors with IrDA interface
V1-G-2M-PVC-V1-G 4-pin cordset, M12 to M12, to connect a UC***-18GS series sen-
sor to the IO-Link-Master02 USB
IO-Link-Master-USB DTM Device type manager – software for operating the IO-Link-Mas-
ter02 USB via FDT.
Table 2.3

Pepperl+Fuchs UC-18GS Series Specifications

General

Brand	Pepperl+Fuchs
Model	UC-18GS Series
Category	Accessories
Language	English