EasyManuals Logo

Pepperl+Fuchs UC-18GS Series User Manual

Pepperl+Fuchs UC-18GS Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
UC***-18GS series
Sensor Programming via the Programming Button
2020-11
21
The yellow LED is now flashing. The number of flashing pulses indicates the currently pro-
grammed output type:
1x: current output
2x: voltage output
1.
Briefly press the programming button to navigate through the output types in succession.
Select the required output type.
2.
Press the programming button for two seconds to switch to the next programming step, the
programming of the sound beam width.
Programming the Sound Beam Width
The red LED is now flashing. The number of flashing pulses indicates the currently pro-
grammed sound beam width:
1x: small
2x: medium
3x: wide
1.
Briefly press the programming button to navigate through the sound beam widths in
succession. Use this method to choose the required sound beam width.
2.
Press and hold the programming button for two seconds to save all performed settings and to
return to normal operation.

Table of Contents

Other manuals for Pepperl+Fuchs UC-18GS Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pepperl+Fuchs UC-18GS Series and is the answer not in the manual?

Pepperl+Fuchs UC-18GS Series Specifications

General IconGeneral
BrandPepperl+Fuchs
ModelUC-18GS Series
CategoryAccessories
LanguageEnglish

Related product manuals