Settings
143 IOLAN DS1/TS2 User’s Guide, Version 4.3
UDP Functionality
Overview
The UDP tab configures the I/O UDP broadcast settings. The I/O UDP broadcast feature periodically
broadcasts the I/O channel status in a UDP message.
You can configure up to four sets of IP address entries (each entry consisting of a start and end IP
address range) to broadcast I/O status data. The broadcast frequency of the UDP packets to the
configured UDP IP addresses can be defined to accommodate network traffic and monitoring PC
application requirements. For details of the UDP I/O datagram see
I/O UDP on page 165.
Field Descriptions
Configure the following parameters:
Enable UDP
Broadcast of I/O
Status
Broadcast Interval
Settings Button
See I/O UDP Settings on page 144 for field descriptions for the I/O UDP
Settings window.
Enables/disables UDP broadcast of I/O channel status (data).
Default: Disabled
Enter the interval, in seconds, for UDP broadcasts of I/O channel status (data).
Range: 1-9999
Default: 30 seconds
Click this button to configure the UDP IP addresses that will receive the I/O
status information.
To Next Page
Loading...
