Permobil Explorer Mini - Getting to Know Your Wheelchair

Explorer Mini Repairs - Base module
4.6.1.2 Installing the top cover
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 2.5 mm.
• Allen socket, 4 mm.
• Slotted screwdriver or pliers.
Figure 46. Put the top cover on the base module.
1. Put the top cover on the base module.
Figure 47. Pull the cable from the nVR2 power module
through the hole.
2. Pull the cable from the nVR2 power module through the hole at
the front of the top cover.
29