SERVICE OPERATIONS
28
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Idle setting
- The engine must be at its operating
temperature.
- Switch off the engine.
- Park the vehicle on its stand.
- Check the operating clearance in the
throttle.
- Start the engine.
- Screw or unscrew the engine speed adjuster
screw (1) to alter the idle speed.
- The rear wheel should not turn.
Idle setting: 2000 to 2200 rpm.
Removal of the fuel filter
- Remove the fuel tank. See: Procedure 3
page 18.
- Remove the fuel filter (1).
Respect the direction of mounting of
the filter shown by an arrow indicating
the direction of flow of the fuel.
Brake inspection
- If one of the 2 brake pads is worn down to
the minimum dimensions (A), the 2 brake
pads must be changed.
A. Mini. thickness: 1.5 mm.
1
1
A = 1.5mm
To Next Page
Loading...
Need help?
General