Sewing
End bartack
- When pressed once the single end-bartack is switched on.
- When pressed again a double end-bartack is switched on.
- Activating a third time switches the end bartack back off again.
Stitch length
This function opens a direct menu for inputting the desired values for the stitch lengths.
10.02 Sewing with the fixed programs
Fixed programs are stored at program numbers 1 and 2.
The fixed programs are used for the fast and comfortable sewing of seams with varying
stitch lengths and/or levels of fullness.
The programs have 2 or 3 seam sections which you can switch between with the knee
switch. They are designed as rotary programs and are completed by activating the pedal
(see chapter 10.04 Decorative seams).
● Turn the machine on.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 10 - 02
2
or
1
Enter
Fig. 10 - 03
In the text line you will see a stylized seam behind the number of the current
seam section. Up-dating of the text line on a change of section is enabled or
disabled in the input menu under SERVICE / SEWING MOTOR / SEAM WITH
MOTOR RUNNING ( see chapter 11.09 summary of the service functions ).
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
● Switch on the bartack functions start/end bartack if desired.
● Select the function select program.
● Input program number 1 or 2.
● Confirm the entry with the Enter key.
10 - 2
To Next Page
Loading...
Need help?
General
