Adjustment
13 - 22
13.04.19 Roller presser pressure
Requirement
The material must be fed reliably. There must not be any pressure marks on the material.
1
+
-
Fig. 13 - 18
● Adjust the roller presser pressure with screw 1 in accordance with the requirement.
Screw 1 is underneath a cover.
When the roller presser pressure is low, the lowering speed of the roller
presser can be increased by turning on the function ROLLER PRESSER
DE-ENERGIZER. See chapter 11.08 Summary of the functions in the
input menu.
To Next Page
Loading...
