11 - 30
Programming
● Confirm the entry with the Enter key.
● Select the seam section end function ( number key 9 ).
● If not active, switch the stitch counter on ( number key 1 ).
● Select the stitch counter function again to open the input menu.
● Enter the number of stitches.
● Confirm the entry with the Enter key.
● Confirm the seam section end by pressing the Enter key.
● Confirm the second seam section by pressing the Enter key.
● Program the third seam section:
This seam section should have
- stitch counting (1 stitch)
- and a stitch length of 5 mm.
● Select the seam section end function ( number key 9 ).
● Select the stitch counter function to open the input menu.
● Enter the number of stitches.
● Confirm the entry with the Enter key.
● Confirm the seam section end by pressing the Enter key.
● Select the stitch length function ( number key 4 ).
● Enter the stitch length.
● Confirm with the Enter key.
● Confirm the third seam section by pressing the Enter key.
Enter
1
Enter
Enter
Enter
1
Enter
Enter
5
Enter
Enter
To Next Page
Loading...
Need help?
General
