11 - 6
Input
● Start the first needle entry position (P01) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Start the second needle entry position (P02) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Start the third needle entry position (P03) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Start the fourth needle entry position (P04) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Select the total number of stitches "P05" with the corresponding plus/minus key.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Switch off the intermediate cutting function (P06) with the corresponding plus/minus
keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Select the seam pattern "PO7" with the corresponding plus/minus key
To Next Page
Loading...
