Pfaff 3307-1 SERIES - Aligning the Cloth Plate (Only on Subclass -1

Adjustment
13 - 26
13.26 Aligning the cloth plate (only on subclass -1/.. and -4/.. )
Requirement
When the machine is in its basic position, the cut-out of cloth plate 1 should be in the
centre of the needle hole.
Fig. 13 - 24
● Switch on the machine.
● Align cloth plate 1 (screws 2) in accordance with the requirement.
● Switch off the machine.
1
2
3
1
0
4
-0
2
6