Pfaff 421E1 - Mounting the Upper V-Belt Guard; Mounting the Lower V-Belt Guard

Mounting and commissioning the machine
8 - 3
Fig. 8 - 05
1
2
2
Fig. 8 - 04
1
3
2
4
4
4
4
8.01.04 Mounting the upper V-belt guard
● Screw position stop 1 onto the right half
of V-belt guard 2.
● Attach both halves 2 and 3 of the belt-
guard with screws 4.
8.01.05 Mounting the lower V-belt guard
● Align belt-guard 1 in such a way that
both the motor pulley and the V-belt run
freely.
● Tighten screws 2.