Pfaff 421E1 - Summary of the Service Functions

Programming
11 - 8
11.09 Summary of the service functions
1- STEPPING MOTORS
2- SEWING MOTOR
3- COLD START
4- SOFTWARE VERSION
5- STITCH WITH HANDWHEEL
1- ALL
2- ROLLER PRESSER
3- FEED WHEEL
4- NEEDLE
1- ADJUST SYNCHRONIZER
2- ADJUST POSITIONS
1- ONE FEED
1- ONE FEED
1- ONE FEED
2- CONTINUOUS FEED
2- CONTINUOUS FEED
2- CONTINUOUS FEED
1- ONE FEED
2- CONTINUOUS FEED
5- SERVICE
6- CONTROL PANEL BRIGHTNESS
2- POS. UP
1- POS. DOWN
3- CUTTING MAGNET
POSITION
4- TURN RELEASE POSITION
5- TURN BACK POSITION
6 - POS. PLACED STITCH
3 - SEAM INDICATED DURING SEWING
4 - REVERSE
5 - AFTER-BRAKING ACTION
6 - ACCELERATION RAMP
7 - BRAKING RAMP
7 - CONFIGURATION