Pfaff 8310-041

Preparation
23
9.02 Selecting a program
The program selection function is used to choose between the types of production
- Manual sealing, see Chapter 10.02,
- Dynamic sealing, see Chapter 10.03,
- Programmed sealing with individual programs, see Chapter 10.06 and
- Programmed sealing with sequences, see Chapter 10.07 or Chapter 10.08
The types of production listed above, particularly their functions, are explained
in more detail in Chapter 10 Sealing.
Switch on the machine, see Chapter 8.03 Switching the machine on/off.
Call up program selection.
●
●
Call up manual sealing, the production type, "Manual Sealing" is activated.
or
Call up dynamic sealing, the production type "Dynamic Sealing" is activated, the sealing
speed can be controlled by the pedal.
or
Select the desired program number on the number block.
Confirm selection and quit selection menu, die production type "rogrammed Sealing with
individual program" is activated.
or
Call up sequence selection.
●
●
●
●
●