Adjustment
77
13.11 Description of the error numbers
13
.11.01 General errors
Display Description
ERROR: 3 Error in allocation EMS memory
ERROR: 4 C167 not reacting
ERROR: 5 Boot file (c167boot.bin) cannot be opened
ERROR: 6 Error in flash-programming
ERROR: 7 Error when opening a file
ERROR: 8 Battery
ERROR: 9 Firmware version conflict
ERROR:
OPERATING DATA
CHECK SUM
(CARRY OUT COLD
START)
Operating data check sum
NEW OPERATING
SOFTWARE (CARRY
OUT COLD START)
New operating software
COLD START CAR-
RIED OUT
Cold start
ERROR: 101 C167-error
ERROR: 106 Error compressed air
ERROR: 110
# Error no. motor
Error DC-Motor 1
ERROR: 120
# Error no. motor
Error DC-Motor 2
ERROR: 140
# Error no. Ultrasonic
generator
Error ultrasonic generator
ERROR: 201 Res. speed for man. sealing outside permissible range
ERROR: 202 Outside amplitude window
ERROR: 203 Outside power window
ERROR: 301 Program too large
ERROR: 302 Contradiction between progpar and progload
ERROR: 303 Flash read error or progr. Defect
ERROR: 304 Memory overlow
ERROR: 305 Invalid configuration
ERROR: 310 File not on source
ERROR: 311 Source reading error, file cannot be opened
ERROR: 312 Target write error, file cannot be opened
ERROR: 313 Source reading error
ERROR: 314 Target write error
ERROR: 315 File config cannot be opened
ERROR: 316 Error when opening MDAT-file
To Next Page
Loading...
Need help?
General
