Description of further functions
Clear
When this function key is pressed, the value is set at "0".
Arrow keys
When these function keys are pressed, the value is increased or reduced.
Esc
When this function key is pressed, the input is cancelled without the value entered being ta-
ken over.
Entering the values in dynamic sealing
Call up the number block for entering the bottom value for sealing power/amplitude.
Enter the desired value on the number block.
Conclude the input, permissible values will be taken over.
Call up the number block for entering the top value for sealing power/amplitude.
Enter the desired value on the number block.
Conclude the input, permissible values will be taken over.
●
●
●
●
●
●
Power sealing (standard) Amplitude sealing
To Next Page
Loading...
