Sealing
35
Start
(This function appears when the top roller is lowered.)
With this function the sealing start is called up, analogue to the pedal function "+2", also see
Chapter 7.03 Pedal.
Roller up/down
With this function the top roller, depending on its position, can be raised or lowered, ana-
logue to the pedal functions "-1" and "+1", also see Chapter 7.03 Pedal.
Turn rollers
This function opens the menu for turning the rollers, see Chapter 10.10 Turning the rollers.
Programming
These functions are used for creating or altering sealing programs, see Chapter 10.05 Crea-
ting/altering a sealing program.
Input menu
This function is used to call up the input mode, see Chapter 11 Input.
Stop
(This function appears during the sealing operation.)
This function is used to stop the sealing operation, analogue to pedal function "-1", also see
Chapter 7.03 Pedal.
Carry out the sealing operation using the pedal functions, see Chapter 7.03 Pedal.●
To Next Page
Loading...
