Feed roller parameters
This function opens a menu for entering the feed roller parameters, see Chapter 11.03.02
Feed roller parameters.
Amplitude window
This function is used to set the permissible difference between the actual and the required
value for the sealing amplitude. If the actual value is outside the defined range, an error mes-
sage is displayed, see Chapter 10.09 Error messages.
Power window
This function is used to set the permissible difference between the actual and the required
value for the sealing power. If the actual value is outside the defined range, an error mes-
sage is displayed, see Chapter 10.09 Error messages.
Selection power sealing/amplitude sealing
This function is used to select the sealing type directly.
Country settings
This function opens a menu for setting the language and measuring units for each country.
Right of access
This function calls up the menu for defining access rights, see Chapter 11.03.03 Rights of
access.
To Next Page
Loading...
