1. Place the box on a steady, flat surface. Lift the
machine out of the box, remove the outer packaging
and lift off the machine hard cover.
2. Remove all outer packing material and the plastic
bag.
Note: Your PFAFF® creative™ 1.5 machine is adjusted to
provide the best stitch result at normal room temperature.
Extreme hot and cold temperatures can affect the sewn result.
Note: Some fabrics have a lot of excess dye which can cause
discoloration on other fabric but also on your sewing machine.
This discoloring may be very difficult or impossible to remove.
Fleece and denim fabric, especially red and blue, often contain
a lot of excess dye. If you suspect that your fabric/ready-to-
wear garment contains a lot of excess dye, always pre-wash it
before sewing to avoid the discoloring.
Among the accessories you will find the power cord and
the foot control.
Note: Consult a qualified electrician if in doubt as how to
connect the machine to the power source. Unplug the power
cord when the machine is not in use.
For this sewing machine, foot control model C-9000
manufactured by CHIEN HUNG TAIWAN Ltd must be
used.
1. Connect the foot control cord to the front socket on
the bottom right side of the machine (A).
2. Connect the power cord to the rear socket on the
bottom right side of the machine (B). Plug the cord
into the wall socket.
3. Press the ON/OFF switch to ON to turn on power
and light (C).
For the USA and Canada
This sewing machine has a polarized plug (one blade
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do
not modify the plug in any way.
15
To Next Page
Loading...
Need help?
General
