Replace the sewing needle with a twin needle. Make
sure that the presser foot is raised and the needle is in its
highest position.
1. Thread the first thread as described on previous
page.
2. Thread the needle eye by hand from front to back.
3. Insert the auxiliary spool pin and slide on a felt pad.
Place the second thread on the spool pin.
4. Bring thread to the left and pull thread into the
thread guide (A) from back to front.
5. Thread the second thread the same way as the first.
6. Make sure that one thread is inside the needle thread
guide and the other one outside.
7. Thread needle eye by hand from front to back.
Note: The weight and irregular surface of specialty threads,
like metallics, can cause increased tension on the thread.
Reducing the tension will prevent needle breakage.
Note: Activate twin needle and select the correct twin needle
width in the settings menu. This will limit the width of all
stitches for that needle size to prevent damage to presser foot
and needle.
Note: Do not use asymmetrical twin needles, since they may
damage your sewing machine.
19
To Next Page
Loading...
Need help?
General
