Place the presser foot under the presser foot holder (A)
lining up the notch (B) with the pins (C). Lower the
presser foot lift and the presser foot will engage in the
presser foot holder.
Note: Check that the presser foot is properly attached by
raising the presser foot lift.
USB Embroidery Stick
Delivered with your machine is a USB embroidery stick
with embroidery designs and PFAFF® creative™ 1.5
embroidery collection booklet. Use the stick to store
designs and embroidery fonts, or to move files between
the computer and sewing machine.
Connect to and Remove From USB Port
Insert the USB embroidery stick in the port with logo
facing you. The USB embroidery stick can only be
inserted one way – do not force it into the port! To
remove, carefully pull the USB embroidery stick out
straight.
Do not remove the USB embroidery stick while
operating the machine or stitching the embroidery,
as this can damage the files on your USB
embroidery stick and you will loose all current
embroidery design information on screen.
Complimentary Embroidery Intro
Software (PC)
A PC embroidery intro software is available for your
PFAFF® creative™ 1.5 sewing and embroidery
machine.
It adds the following features:
• Helps you to adjust your embroideries on the
computer before you sew.
• Personalize your embroideries in true 3D in a real
hoop.
• Rotate your embroideries to any degree, mirror them
from side to side or end to end and scale or resize
your embroideries.
• Adjust an unlimited number of designs and lettering.
• Adjust the colors to the thread shades from your
preferred manufacturer. Combine with lettering or
25
To Next Page
Loading...
Need help?
General
